DRILL PRESS WITH DRIVE BELT

Art. 0242
NEW BELT TENSION DEVICE, DRILLING DEPTH READOUT, LED LIGHT INCLUDED, ROTATING AND INCLINABLE TABLE. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.
Max drilling capacity on cast iron with pre-drilling hole
Ø 25 mm
Max drilling capacity on steel with pre-drilling hole(s235jr)
Ø 20 mm
Continuous drilling capacity
Ø 16 mm
Spindle taper
CM 2
Chuck sizes
1 - 16 mm B18
Spindle speed
(16) 180 ÷ 2770 rpm
Spindle travel
85 mm
Quill
ø 47 mm
Column
ø 72 mm
Height
990 mm
Distance chuck-column
180 mm
Distance between spindle nose and table
420 mm
Distance between spindle nose and base
600 mm
Table dimensions
305 x 305 mm
Slot
16 mm
Tilting table
± 45°
Motor
230 V 50 Hz 0,75 kW
Net weight
60 kg
Gross weight
61,50 kg
EAN Code
8012667254216
Packaging dimensions
890x570x340 h mm
Privacy | General Conditions of Sale | Site map
FERVI SpA - Via del Commercio 81 - 41058, Vignola (Modena) - Cap.Soc. € 2.539.240 i.v. - Reg. Imprese Mo (Italia), C.F. e P.I. 00782180368 • REA Mo 184870.